How To Install Your Free Wacom Softwares

1. How To Install Wacom Pen
2. How To Install Your Free Wacom Softwares Windows 10
3. How To Install Wacom Driver
4. How To Install Your Free Wacom Softwares Download

Install the Wacom driver software. Go to the Wacom drivers page. Click Download next to the latest driver that corresponds to your computer's operating system. Follow the prompts to finish installation.

What Are Best Drawing Software For Wacom Drawing Tablet?

There are lots of animation software were available on the web. But it hard to find out which software is the best for animation with all the features like pressure sensitivity, infinite canvas, UI and a lot more. Wacom Tablet is an amazing tool to create an animation but for this, you must have the right animation software that compatible with Wacom Tablet.

We’ve gathered some of the best software for animation that supports the Wacom tablet. This animation software was highly recommended by professional animation developers to use with Wacom Tablet while creating an animation.

Best Animation Softwares To Use With Wacom Tablet And Digital Painting

1 # Leonardo

Leonardo is mostly recommending a drawing and painting app for the Wacom Tablet. Because of its support features like pressure sensitivity and it easy to use. The software has the blazing speed of performing it will start in a few seconds and save your file in a blink.

2 # Paint Tool SAI

The Paint Tool SAI is best for beginners to start learning animation and it’s compatible with Wacom Tablet. The software is the least awkward and easy to use compared to other animation software it’s the best software to get started in drawing and painting.

#3 ArtRage

For digital art, ArtRage is mostly used by professional painters to create amazing paintings. The software is full of drawing and painting features mainly this software is used to create realistic canvas and paint textures. However, the software also has professional graphic design tools. You can easily download the software on your tablet from its official website.

4# AutoDesk SketchBook

SketchBook is used by product designers, architects, automobiles, and industrial designers to emphasize immediately their ideas.

It’s one of the best sketchings software because of its features and an outstanding interface that provides maximum drawing space to create amazing art. The software supports more than 190 brushes that can consolidate both textures and shapes. You can easily export your art to JPG, PNG, BMP, TIFF and other file formats.

5# BlackInk

BlackInk is also a great digital painting solutions tool. The software allows its users to custom brushes with 2D printing and more features. With a responsive interface, the software is easy to use on tablets.

6# SketchPort

The sketchport is an online drawing software that is best for painters who just started learning painting skills. The interface of the software quiet easily you can easily draw painting using a bush. Where this platform also allows you to browse other painters’ art to get an amazing idea for your paintings.

7# Krita

Krita is an open-source painting tool. The features that you will get in this software were Brush Stabilizers, Pop-up Palette, Resource Manager, Wrap-around mode and Custom Brushes. The software is free to download you can easily get it from krita.org.

7# Adobe Photoshop

Adobe Photoshop is a well-known software for editing photos by professional photographers. However, lots of people don’t know that this software also used to create amazing digital paintings. The software has one of the best digital painting tools for professional painters. You can create 300 dpi paintings with a white background using differently sized soft bushes and other painting tools. On YouTube, you can easily find lots of free courses for digital painting with Adobe Photoshop software.

8# Mari

The Foundry previously is also known as Mischief digital painting software which supports Windows, Android and iOS platforms. The interface of the software is quite amazing and simple for a professional animation developer. In terms of features and tools, the software has different types of bushes, frames and many other tools to create an outstanding digital painting.

Mari is a 3D projection painting software, this software free artists from limits of HD resolution and complexity with complete support of UDIM support. With this, you can work on hundreds of high-resolution texture maps as they were in a single tile.

9 # Corel Painter

Corel Painter offers newly updated digital art & painting software that supports Windows and Mac platforms. The software has newly accurate digital painting brushes with 20X faster speed. It features newly interface advancements, improved brushes selector, colour harmonies with enhanced GPU brushing and a lot more.

It has more than 36 brush categories with 900+ included brushes view improved brush dab and stroke previews at-a-glance. It also rapidly switches to your last used brush to get more painting pixels with compact Brush Selector options.

10 # Artweaver

The Artweaver recently released its 6th version edition that combines new features with faster bushes and a lot more features that help artists to create amazing paintings without having a hassle. As is the 6th version of the painting software which also means it’s one the oldest digital painting software available on the internet.

Furthermore, the software has easy to use interface that allows any new beginner digital painter to learn painting using an amazing tool. Moreover, if you are a professional digital painter then, in this case, you can also use its different types of bushes sizes and high resolution maps to create art. Currently, the art weaver only available for the Windows platform.

Conclusion

In the end, there are lots of drawing tools are available on the web. And a lot of them support the Wacom Tablet and listed the best of them here for you. In case, we’ve missed any drawing software for the Wacom tablet. Please tell us using a comment box.

Don’t forget to follow us on Facebook and Twitter to get daily tech-related updates on your social account.

Contents

Choosing an STU

In addition to price considerations please bear in mind the following factors:

1. If you want to use your signature pad over RDP then there are currently (Feb 2021) two options:

• Purchase a separate USB forwarding tool to handle the pen data over the network connection)

• Choose an STU which operates serially i.e. the 430V (a serial STU) or 540 (which can be switched into serial mode if needed)

  NOTE: The uploading of colour images over a serial connection to a colour STU is too slow to be user-friendly and for this reason the 540 allows for the pre-uploading of images into ROM for superior response times. This requires special handling in the application.

2. If you need to capture signatures over Citrix then please see our Citrix Compatibility list

3. The 300, 430 and 430V provided limited screen space so if you need to display a lot of information for the user to read prior to signing then it would probably be better to choose a 540.

4. The STU-541 is primarily aimed at installations where a high degree of security is required in the data transmission between the pad and the PC. The 541 uses TLS encryption to deliver this.

STU Device Specifications

Models marked with a '*' are no longer in production

STU Driver

Download and run Wacom-STU-Driver-5.4.5.exe

Requirements

The driver is required to use colour STU signature pads with the STU SDK and Wacom Signature SDK.The driver is also required when using any STU signature pad on Windows 8 or 8.1.

Summary

The driver is required for the colour display STU signature pads and also when using any of the STU signature pads on Windows 8.1.
It allows the device to use USB Bulk Transfer to handle the transfer of increased image data size (compared with the mono STU tablets).
On Windows 8 and 8.1 it also disables the Enhanced Power Management setting.

The driver installation merely configures the USB interface for the STU tablet and can be used in all configurations without any detrimental effect.

The need for installation is dependent on the STU model and Windows version as follows:

If in any doubt we recommend installing it.

Instructions

Using Wacom-STU-Driver.exe

• Check that the STU tablet has been disconnected before running the installer.
• Download the .exe and run it directly from Windows Explorer or in a DOS command line.
• The .exe autodetects 32 or 64 bit Windows and installs accordingly.

To view the available options use the command:

For example, for minimal prompts:

To disable the check for STU connection:

To uninstall the driver:

Note for Windows 7

To use the /q option the installer must be run in elevated mode to give Administrator rights, e.g.:

STU Driver - delete cache

Download

Download and unzip reg-delete-wacom-usb-cache.zip

Requirements

Installation of an STU tablet.

Summary

Use the delete cache utility if the STU appears to be not working after installing the driver and attempting to use STU Utilities
Run from a command line or File Explorer to delete registry entries related to a Wacom USB device:

Description

Syntax: reg-delete-wacom-usb-cache.exe

First disconnect the STU device.
The utility prompts to allow changes to your device.
It then searches for Windows registry entries related to Wacom USB and deletes those found, e.g.:

On completion reconnect the STU device which will then be reloaded by Windows.

STU HID Diagnostic Tool

Installation

Download hidinfo-x86-v2.6.14745.41.zip

Requirements

Installation of an STU tablet.
Colour models require the STU driver
Download and unzip the diagnostic to run on 32 or 64 bit Windows.

Summary

How To Install Wacom Pen

Download and use the tool according to the directions provided by your support engineer.
Normally you will need to run the following command in a Dos prompt and email the resulting text file:

Description

Syntax: hidinfo [options]

Options:

• filename displays underlying filename
• kernel displays kernel handle
• attr displays HID attributes as reported by HidD
• caps displays the report IDs of the capabilities
• all displays everything
• /? help

Run hidinfo.exe using a Command Prompt:

The STU device report should be similar to one of the following examples:

056a:00a2:0068 [xRW] Manufacturer='Wacom Co.,Ltd.' Product='STU-300' SerialNumber='x0409'
056a:00a1:0101 [xRW] Manufacturer='Wacom Co.,Ltd.' Product='STU-500' SerialNumber='x0409'
056a:00a3:0101 [xRW] Manufacturer='Wacom Co.,Ltd.' Product='STU-520A' SerialNumber='x0409'

In the examples shown, the device accessibility is described as [xRW]

• The first character ('x' or 's') denotes exclusive or shared access.
• The second character ('R') denotes read access.
• The third character ('W') denotes write access.

Note: By default the signature software requires exclusive-read-write access to the device to operate successfully.

In some installations other applications or installed drivers may access the device in shared mode.
In this case, only shared access is possible: [sRW] indicates the device is only available for shared-read-write access.
Note, this will prevent the signature software operating successfully.

If another application has opened the device for exclusive access, then 'hidinfo' will be unable to open the device and will report an error.
This is typically:

'hidinfo' determines the available access by a process of elimination using standard API calls to the Windows CreateFile API.
It will try in sequence:

CreateFile(fileName, GENERIC_READ|GENERIC_WRITE, 0 , ...
CreateFile(fileName, GENERIC_READ , 0 , ...
CreateFile(fileName, 0 , 0 , ...
CreateFile(fileName, GENERIC_READ|GENERIC_WRITE, FILE_SHARE_READ|FILE_SHARE_WRITE, ...
CreateFile(fileName, GENERIC_READ , FILE_SHARE_READ|FILE_SHARE_WRITE, ...
CreateFile(fileName, 0 , FILE_SHARE_READ|FILE_SHARE_WRITE, ...

STU Utilities

Installation

1. Download, extract and run the STU Utilities
2. Download and extract the STU Images

Requirements

Installation of STU tablet.
Colour models require the STU driver
Download and unzip the 32-bit utilities to run on 32 or 64 bit Windows.

Summary

STU Utilities are standalone programs which you can use to test the operation of an STU signature pad.
They can be used without installing the STU SDK.
Where applicable a Console version of the program is included, identified by a C suffix, e.g.

These applications use the Command Prompt and do not display a Window.

ClearScreen.exe

Clears the tablet display

HardwareReset.exe

Performs a hard reset of the tablet firmware

Identify.exe

Reports the tablet detected:

In addition the test displays properties on the LCD display. e.g.

PenData.exe

Reports the Device connected status with real-time pen data:

SendToSTU.exe

Sends the specified image file to the device (see /? for options).
STU-Images.zip contains suitable image files:

SoftReset.exe

Performs a soft reset of the tablet firmware

STU Serial Connection

• Utilities

Installation

Download theSerial Connection UtilitiesandDemoButtons Test tool

The Serial Connection Utilities zip file contains the following tools:

Overview

Certain STU models support the serial communication interface:

• STU-430V
• STU-540

The tablets can be configured for:
Human Interface Device (HID) - standard USB connection
or
Virtual COM Port (VCP) - serial connection over USB

Used in a Command Prompt, the connection utilities provide tools to verify and change the connection mode.

Utilities

query

Use this utility to determine the current state of the tablet.
For a USB connection:

For a serial connection:

If the tablet is in HID mode its status will be reported.
If it is in serial mode the results will be:

getSerialPorts

To find the COM port use getSerialPorts:

When in serial mode the STU tablet appears as a virtual COM port.The virtual com port can then be used with query, specifying the port name and baudrate:

NOTE for COM10 and above: COM10 and above require special handling. See Microsoft support
Example:

->query.exe com6
STU query sample
connecting to com6 128000
Status.statusCode = Ready
Status.lastResultCode = None
Status.statusWord = 00
HidInformation = 056a:00a6:0104
Information.modelName = STU-430V
Information.firmwareMajorVersion = 01
Information.firmwareMinorVersion = 04
Information.secureIc = 0
Information.secureVersion = bb.0.0.0
Capability.tabletMaxX = 9600
Capability.tabletMaxY = 6000
Capability.tabletMaxPressure = 1023
Capability.screenWidth = 320
Capability.screenHeight = 200
Capability.maxReportRate = 200
Capability.resolution = 2540
Capability.encodingFlag = 1bitZlib
Uid = 0x00000000
Uid2 = 5JZQS00032
Eserial - not supported
DefaultMode = Serial
RenderingMode - not supported
ReportRate = 150
HostPublicKey - not supported
DevicePublicKey - not supported
DHprime - not supported
DHbase - not supported
InkingMode = Off
InkThreshold.onPressureMark = 21
InkThreshold.offPressureMark = 16
HandwritingThicknessColor.penColor = 0000
HandwritingThicknessColor.penThickness = 2
BackgroundColor - not supported
HandwritingDisplayArea.upperLeftXpixel = 0
HandwritingDisplayArea.upperLeftYpixel = 0
HandwritingDisplayArea.lowerRightXpixel = 319
HandwritingDisplayArea.lowerRightYpixel = 199
BacklightBrightness - not supported
ScreenContrast - not supported
HandwritingThicknessColor24.penColor = 000000
HandwritingThicknessColor24.penThickness = 2
BackgroundColor24 - not supported
PenDataOptionMode = None
OperationMode - not supported
RomImageHash - not supported
ReportSizeCollection =
PenData 7
Status 5
Reset 2
HidInformation 9
Information 17
Capability 17
Uid 5
Uid2 11
DefaultMode 3
ReportRate 2
RenderingMode -
Eserial -
PenDataEncrypted 17
HostPublicKey -
DevicePublicKey -
StartCapture 5
EndCapture 2
DHprime -
DHbase -
ClearScreen 2
InkingMode 2
InkThreshold 5
ClearScreenArea 11
StartImageDataArea 11
StartImageData 2
ImageDataBlock 256
EndImageData 2
HandwritingThicknessColor 4
BackgroundColor -
HandwritingDisplayArea 9
BacklightBrightness -
ScreenContrast -
HandwritingThicknessColor24 5
BackgroundColor24 -
BootScreen 2
PenDataOption -
PenDataEncryptedOption -
PenDataOptionMode 2
PenDataTimeCountSequenceEncrypted 17
PenDataTimeCountSequence 11
EncryptionCommand 68
EncryptionStatus 17
GetReport -
SetResult -
PinPadData -
PinPadDataEncrypted -
PinOperationMode -
OperationMode -
RomStartImageData -
RomImageOccupancy -
RomImageHash -
RomImageDelete -
CurrentImageArea -
EventData -
EventDataEncrypted -
RomImageDisplay -
160 5
162 5
163 17
171 12
178 3
180 3
181 11
ReportSizeCollection 512
->

simpleInterface

Use this utility to display realtime pen data.
When the pen is in contact or in close proximity of the tablet surface, the X/Y coordinates and pressure values will be reported.

Press Ctrl-C to exit the program.

->simpleInterface.exe com6
STU simpleInterface sample
connecting to com6 128000
Connected!
getInformation()... modelName=STU-430V firmware=01.04.187
getReportRate()... 150
setPenDataOptionMode(SequenceNumberTimeCount)... ok!
getPenDataOptionMode()... penDataOptionMode=TimeCountSequence
setClearScreen()... ok!
setInkingMode(On)... ok!
(use stylus, press CTRL-C to quit)
rdy sw x y pres time seq
1 1 612 5339 3528 3513 1
1 1 612 5339 3528 3516 2
1 1 614 5339 3528 3523 3
1 1 615 5329 3518 3529 4
1 1 620 5329 3518 3536 5
1 1 624 5329 3518 3543 6
1 1 627 5329 3518 3549 7
1 1 630 5318 3513 3556 8
1 1 632 5307 3506 3563 9
1 1 633 5289 3493 3569 10
1 1 625 5253 3468 3576 11
1 1 593 5189 3422 3583 12
1 1 470 5094 3348 3589 13
1 1 263 4971 3247 3596 14
1 1 64 4819 3111 3603 15
1 0 0 4664 2960 3609 16
1 0 0 4502 2795 3616 17
1 0 0 4356 2634 3623 18
1 0 0 4228 2484 3629 19
1 0 0 4124 2350 3636 20
1 0 0 4068 2263 3643 21
0 0 0 0 0 3696 22
quitting!
setInkingMode(Off)... ok!
setClearScreen()... ok!
setPenDataOptionMode(None)... ok!
->

hid2serial

Use this utility to change the STU to serial VCP mode. No parameters are required.
You can verify that the STU is in serial mode by viewing the serial ports with getSerialPorts.exe.
Verify the connection using query.exe:

->hid2serial.exe
STU HID2serial sample
Device:
056a:00a8:0100
Status.statusCode = 0
Status.lastResultCode = 0
Status.statusWord = 00
Information.modelName = STU-540
Information.firmwareMajorVersion = 01
Information.firmwareMinorVersion = 00
Information.secureIc = 0
Information.secureVersion = 0.0.0.0
setDefaultMode()...
Done!
Status.statusCode = 0
Status.lastResultCode = 0
Status.statusWord = 00
Rebooting device
->

In addition you can view the connection in Windows Device Manager.
An HID connection appears as shown below.

A serial connection appears as follows:

Normally Windows automatically installs the FTDI driver needed to create the VCP.If the tablet is reported as the following:

then download and install the driver from: http://www.ftdichip.com/Drivers/VCP.htm](http://www.ftdichip.com/Drivers/VCP.htm

For example: http://www.ftdichip.com/Drivers/CDM/CDM21218_Setup.zip

How To Install Your Free Wacom Softwares Windows 10

NOTE ON SERIAL KIT

A serial kit is available for the STU-540. It includes:

• Serial D-type to tablet cable
• Power supply

How To Install Wacom Driver

When the serial kit is used the tablet must still be switched to serial mode but can be connected to a physical serial port.
In this case a different baud rate is used as follows:

serial2hid

How To Install Your Free Wacom Softwares Download

Use this utility to restore the default STU tablet HID connection mode.

You can confirm the HID connection using query.exe.

serial to hid STU query sample
serial2hid serialPort baudRate
{processReadBuffer size=22}
{queued report: size= 17 08 53 54 55 2d 35 34 30 00 00 01 00 00 02 00 00 00}
{removing 22 bytes}
Information.modelName = STU-540
Information.firmwareMajorVersion = 01
Information.firmwareMinorVersion = 00
{processReadBuffer completed
{processReadBuffer size=5}
{queued report: size= 2 81 00}
{removing 5 bytes}
{processReadBuffer completed
{processReadBuffer size=5}
{queued report: size= 2 81 00}
{removing 5 bytes}
{processReadBuffer completed

DemoButtons

Captures a signature from the STU pad with options to perform via standard HID mode or via a virtual COM port.
Signature Mode can also be selected for use with the STU 540.